Robo Door Range

Driveway Gates

Steel or aluminium gates in plain, slatted, decorative or laser-cut designs, sized to the entrance width, side run, slope and wind.

Laser-cut steel driveway gate with a bamboo patternLaser-cut bamboo-pattern driveway gate across a paved drivewayLaser-cut steel fencing panels along a street boundary

Range details

Gates

Laser Cutting

Pricing

Custom quotation

Robo Door Sliding & Turning Driveway Gate

A sliding-and-turning driveway gate for entrances with too little side run for a straight slider. It slides and then turns along the boundary.

Robo Door Sliding Driveway Gate

A sliding driveway gate made in our Alrode and Lusaka factories to your entrance. It parks along the wall, so it needs a side run and a sound track instead of swing space.

Robo Door Sliding Driveway Gate

Robo Door Swing Driveway Gate

A swing driveway gate made in our Alrode and Lusaka factories to your entrance, in one or two leaves. It needs clear ground behind it to open.

Robo Door Swing Driveway Gate

Let your driveway choose the gate

Sliding or swing?

A sliding gate needs enough side run and a sound track or support. It suits short driveways, wide entrances and sites where a swinging leaf would block parking. A swing gate needs a clear arc for the leaves. Check slope, wind, hinge position and where people walk before you choose it.

When neither fits

Where neither layout works naturally, a sliding-and-turning gate or another site-specific layout can be assessed.

Automation

We fit Centurion sliding gate motors: the D5-Evo or D5 SMART on home gates up to 500 kg, and the D10 SMART on heavier and commercial gates. Centurion's specification for these motors includes battery backup, so the gate keeps working when the power goes, and a manual release locked with a key, so you can still slide the gate by hand. The full specifications are on Centurion's D5-Evo SMART and D10 SMART pages. Your quotation states the warranty on the motor.

Products include: sliding, swing and combined-motion driveway-gate options in the Gates category.

Finish

Steel is powder coated, sandblasted and primed, electroplated or hot-dip galvanised; aluminium is powder coated. Paint cover runs from one to five years depending on the finish, and galvanising adds rust cover of up to ten years inland. The full table is on the warranty page.

Read more: Driveway gate prices in 2026.

Key Features
  • Plain, slatted, decorative or laser-cut faces
  • Steel or aluminium, depending on the design
  • Single- or double-leaf swing gates

Robo Door

Reviews

What customers say on HelloPeter

Matthew P.

HelloPeter

From start to finish, quote to execution: the service was exceptional

Princess T.

HelloPeter

Yellow team on site 15 minutes early: took the time to show me how to use the gate

Rika V.

HelloPeter

Installed 2 gates and the end result was absolutely perfect

Installation or supply-only (DIY)

Every Robo Door quote gives you two options. With Installation: we measure and fit it. In Gauteng our own team fits; elsewhere in South Africa the Robo Door location for your town does, in Zambia our Lusaka team, and the Robo Door distributor in most other markets. Supply Only / DIY: supplied to your measurements for your own fitter, in all twelve markets.

Measured on site, made to size

Free site visit and quote

Made to your measurements, never a stock size

Installed by Robo Door or a named distributor, stated on the quote

Warranty named by product line on your quote

South Africa: 70% deposit, or 7% off if you pay upfront

Get a free quote

In South Africa and Zambia we measure at a free site visit. Elsewhere, send photos and the size of each opening. Your written quotation names the product, the finish and the warranty.

Thank you. We'll contact you within one working day.
Something went wrong while submitting the quotation request. Please try again.
Thank you. We'll contact you within one working day.
Oops! Something went wrong while submitting the form.